Reducer used four skills

Reducer used four skills:

When oil was found in the work of a, [rises more than 80 ℃ or oil pool temperature over 100 ℃ and produce the phenomenon such as abnormal noise should stop using, check the reason, have to troubleshoot, after oil change, may continue to operate.

Second, the oil change wait for reducer cooled down when no burning danger, but should still keep warm, because completely cooled, the increase of oil viscosity, oil drain difficult. Note: to cut off the transmission power, prevent inadvertently electricity.

Three, in 200 ~ 300 hours after operation, the first oil change should be made, in use should be regularly check the oil quality, to mix impurities or bad oil must be timely replacement. In general, the speed reducer for long-term continuous work according to run 5000 hours, or once a year to replace the new oil, stop using the speed reducer for a long time, is also a new oil should be replaced before the function again. Reducer should join the same as the original brand of oil, may not be used with different type of oil phase, the same brand but different viscosity oil allow mix.

Four, the user should have the use of reasonable maintenance rules and regulations, the reducer operation situation and the problems found during the inspection should be done carefully record, the above regulations must be strictly implemented.