1) single stage transmission, the transmission ratio is commonly 9-87
B (X) W (L) D10-23-0.55
Description:
B (X) - B series cycloid pin wheel reducer; X series cycloidal reducer.
W (L) - W for horizontal installation; L for vertical installation.
D (B) - D for the configuration ordinary motor Y series; B for the configuration YB series of explosion-proof motor.
Models of 10 10 - stand.
23 - reduction ratio for 23.
0.55 - motor power is 0.55 kw.
2) double transmission, transmission ratio in general is 121-7569
B (X) W (L) ED195-475-16
Description:
B (X) - B series cycloid pin wheel reducer; X series cycloidal reducer.
W (L) - W for horizontal installation; L for vertical installation.
E - E for two-stage transmission.
D (B) - D for the configuration ordinary motor Y series; B for the configuration YB series of explosion-proof motor.
195 - frame model for 195.
475 - reduction ratio for 475.
16 - motor power is 16 kw.
use
Cycloidal reducer adopts meshing cycloid pin gear, planetary transmission principle, so usually also called planetary cycloid reducer, planetary cycloidal reducer can be widely used in petroleum, environmental protection, chemical, cement, transport, textile, pharmaceutical, food, printing, lifting, mining, metallurgy, construction, power generation and other industries, as a driver or reduction gear, the machine is divided into horizontal, vertical, biaxial and straight league such as assembly way. Its unique stable structure in many cases the alternative ordinary cylindrical gear reducer, the worm gear and worm reducer, therefore, planet cycloidal reducer is widely used in various industries and fields, broadly welcomed by the masses of users.
Conditions of use
1, the cycloidal reducer allows you to use in place of continuously, while at the same time allowing were running up, the two directions. Some models cycloidal reducer only allows a single direction.
2, input shaft speed rated RPM to 1500 RPM, the input power is greater than 18.5 KWH recommended 6 pole machine supporting the use of 960 r/min.
3, horizontal installation of cycloidal reducer working position are in horizontal position. When installing the largest horizontal tilt Angle is generally less than 15 °. Other measures should be taken in more than 15 ° guarantee adequate lubrication and prevent leakage.
4, cycloidal reducer output shaft cannot be affected by the larger axial force and radial force, when have larger axial force and radial force must take other measures.